6.13 Read Sector(s) (20h)
This command reads from 1 to 256 sectors as specified in the Sector Count register. A sector count of 0 requests
256 sectors. The transfer begins at the sector specified in the Sector Number Register. When this command is
issued and after each sector of data (except the last one) has been read by the host, the Drive sets BSY, puts the
sector of data in the buffer, sets DRQ, clears BSY, and generates an interrupt. The host then reads the 512 Bytes
of data from the buffer.
If an error occurs, the read terminates at the sector where the error occurred. The Command Block Registers
contain the cylinder, head, and sector number of the sector where the error occurred. The flawed data are
pending in the sector buffer. Table 27 defines the Read Sector command Byte sequence.
Table 27: Read sector(s)
Task File Register
7
6
5
4
3
2
1
0
COMMAND
20h
DRIVE/HEAD
1
LBA
1
D
Head (LBA 27-24)
CYLINDER HI
CYLINDER LOW
SECTOR NUM
SECTOR COUNT
FEATURES
Cylinder High (LBA23-16)
Cylinder Low (LBA15-8)
Sector Number (LBA7-0)
Sector Count
nu
6.14 Read Verify Sector(s) (40h or 41h)
This command is identical to the Read Sectors command, except that DRQ is never set and no data is transferred
to the host. When the command is accepted, the Drive sets BSY. When the requested sectors have been verified,
the Drive clears BSY and generates an interrupt.
If an error occurs, the verify terminates at the sector where the error occurs. The Command Block Registers
contain the cylinder, head and sector number of the sector where the error occurred. The Sector Count Register
contains the number of sectors not yet verified.
Table 28 defines the Read Verify Sector command Byte sequence.
Table 28: Read Verify Sector(s)
Task File Register
7
6
5
4
3
2
1
0
COMMAND
40h or 41h
DRIVE/HEAD
1
LBA
1
D
Head (LBA 27-24)
CYLINDER HI
CYLINDER LOW
SECTOR NUM
SECTOR COUNT
FEATURES
Cylinder High (LBA23-16)
Cylinder Low (LBA15-8)
Sector Number (LBA7-0)
Sector Count
nu
6.15 Request Sense (03h)
This command requests extended error information for the previous command. Table 29 defines the Request
Sense command Byte sequence.
Table 30 defines the valid extended error codes. The extended error code is returned to the host in the Error
Register.
Table 29: Request sense
Task File Register
7
6
5
4
3
2
1
0
COMMAND
03h
DRIVE/HEAD
1
LBA
1
D
nu
CYLINDER HI
CYLINDER LOW
SECTOR NUM
SECTOR COUNT
FEATURES
nu
nu
nu
nu
nu
Swissbit AG
Industriestrasse 4-8
Swissbit reserves the right to change products or specifications without notice.
Revision: 1.10
CH-9552 Bronschhofen
Switzerland
X-200m_data_sheet_SA-UxBR_Rev110.doc
Page 23 of 47
相关PDF资料
SFSA32GBV1BR4TO-I-NC-216-STD FLASH X-200S SLC SLIM SATA 32GB
SFSA64GBQ1BR8TO-I-NC-216-STD FLASH SSD UDMA IND 2.5" 64GB
SFSO4404NR FEMALE SCREWLOCK 4-40 .197"
SFW22R-1STE1 SFW22R-1STE1-FFC/FPC CONN
SFW24S-2STE1 SFW24S-2STE1-FFC/FPC CONN
SFW30S-6STE1 SFW30S-6STE1-FFC/FPC CONN
SGT3100SBT TVS SURGECTOR 275V 50A DO-214AA
SI2493FT18-EVB BOARD EVAL SI2493 + SI3018 24PIN
相关代理商/技术参数
SFSA32GBU1BR4TO-I-NC-226-STD 功能描述:FLASH X-200M SLC MSATA 32GB RoHS:是 类别:计算机,办公室 - 元件,配件 >> 固态硬盘驱动器 系列:X-200M 标准包装:1 系列:- 存储容量:64GB 存储器类型:闪存 - NAND 其它名称:VL 64 GB SSHD KITVL64GBSSHDKIT
SFSA32GBU1BR4TO-I-NC-236-STD 功能描述:Solid State Drive (SSD) 32GB SATA II FLASH - NAND (SLC) mSATA 3.3V 制造商:swissbit na inc. 系列:X-200M 零件状态:有效 存储容量:32GB 存储器类型:FLASH - NAND(SLC) 外形尺寸:mSATA 速度 - 读取:100MB/s 速度 - 写入:90MB/s 电压 - 电源:3.3V 类型:SATA II 电流 - 最大值:- 工作温度:-40°C ~ 85°C 重量:0.24 盎司(6.84g) 大小/尺寸:50.80mm x 29.85mm x 3.30mm 标准包装:50
SFSA32GBV1BR4TO-C-NC-226-STD 制造商:SWISSBIT NA INC 功能描述:FLASH
SFSA32GBV1BR4TO-I-NC-216-STD 功能描述:FLASH X-200S SLC SLIM SATA 32GB RoHS:是 类别:计算机,办公室 - 元件,配件 >> 固态硬盘驱动器 系列:X-200S 标准包装:1 系列:- 存储容量:64GB 存储器类型:闪存 - NAND 其它名称:VL 64 GB SSHD KITVL64GBSSHDKIT
SFSA32GBV1BR4TO-I-NC-226-STD 功能描述:FLASH X-200S SLC SLIM SATA 32GB RoHS:是 类别:计算机,办公室 - 元件,配件 >> 固态硬盘驱动器 系列:X-200S 标准包装:1 系列:- 存储容量:64GB 存储器类型:闪存 - NAND 其它名称:VL 64 GB SSHD KITVL64GBSSHDKIT
SFSA32GBV1BR4TO-I-NC-236-STD 制造商:SWISSBIT 功能描述:SLIM SATA X-200S DENSITY INDUSTRIAL - Trays 制造商:SWISSBIT NA INC 功能描述:SSD SLIMSATA IND 32GB 5V
SFSA4096Q1BR4TOIMS216 制造商:Swissbit 功能描述:4GB SATA SSD -40 +85 (X-200)
SFSA4096Q1BR4TO-I-MS-216-STD 功能描述:FLASH SSD UDMA IND 2.5" 4GB RoHS:是 类别:计算机,办公室 - 元件,配件 >> 固态硬盘驱动器 系列:x-200 标准包装:1 系列:- 存储容量:64GB 存储器类型:闪存 - NAND 其它名称:VL 64 GB SSHD KITVL64GBSSHDKIT